In this article, we will discuss the different types of keys and fobs for an Acura CL and address the common questions on how you can get a key replacement.
Introduction to The Acura CL
The Acura CL was in production for two generations, from 1997 to 1999 (first generation) and from 2001 to 2003 (second generation). Acura did not make a 2000 model year for the CL.
What Types of Keys Does An Acura CL Use?
This vehicle has two different types of keys.
Mechanical key: 1995, 1996, 1997, 1998
1995-1998 Acura CL uses a HD103 mechanical key.
Transponder key: 1998, 1999, 2001, 2002, 2003
1998-2003 Acura CL uses a HD106 transponder key.
A 2008 Acura CL can be a mechanical key or a transponder key. Consult your local locksmith or dealer to find the correct key for your vehicle.
I Lost My Only Key For My Acura CL. How Can I Get A Replacement?
You have two options if you lost your car keys.
Call a locksmith: Automotive locksmiths carry a large array of car keys and fobs for emergency jobs. Locksmiths are also usually cheaper than the dealership. They might have the key or fob that you need on hand or will be able to order it for you. Make sure to provide the locksmith with the year, make, and model of your vehicle so that they can find the correct key for your vehicle. You will also need registration/title and a valid driver’s license. Most automotive locksmiths offer a mobile service and can come to your location. You can receive service from a locksmith in as low as 10 minutes!
Bring the vehicle to the dealer: You might not have a locksmith in your area to make the key that you need for your vehicle and you will have to contact the dealership. Dealerships are not usually known for mobile services, so you will need to tow your vehicle to the dealership. Dealerships normally require appointments, so make sure to call before towing your vehicle. Dealerships require that you have your VIN, valid title/registration, and ID to make a new car key/fob. Dealerships can only make you a new car key by VIN, so if you replaced your ignition or rekeyed your locks, you will need to contact a locksmith who can read your key cuts through your lock.
Can I Get A Key Cut For My Acura CL By VIN If I Lost My Only Key?
It is possible that you can get a key cut by VIN depending on the year of your vehicle. Most dealerships only store key codes for up to 10 years. A locksmith usually has access to key codes for 1995 and above. It is best to contact your local dealer or locksmith to see if they will have access to your key code from you VIN. If they cannot obtain this information from you VIN, you will have to contact a locksmith that can read your key cuts from your lock. If your car key requires programming, you will have to tow your vehicle to the dealer. Most locksmiths are mobile and can come to you to program the key to your vehicle.
My Acura CL Has Two Different Keys For The Door And Ignition. What Do I Do If I Lost My Keys?
Chances are that you replaced your ignition before or have had your locks rekeyed. You can contact a local locksmith who can read the key cuts from your lock or ignition. The locksmith should then be able to make you a new set of keys. It is advised that you have the locksmith rekey the locks so that the door locks and ignition use the same key.
My Acura CL Car Key Broke In Half. What Can I Do?
If you have a broken key, the solution is to get a key replacement. It is not recommended that you tape your key together, because the blade could get stuck in the ignition and could damage the wafers inside. If you have a chipped key, you could also cause damage to your immobilizer. You should replace your key immediately.
The best way to get a key replacement is to call a locksmith. Most locksmiths offer mobile services and can cut/program a new metal key or transponder key to your vehicle. If you have a mechanical key that doesn't need programming, you can bring the broken key to a locksmith shop and they can cut you a new key if the original cuts are still intact. If you don't have any locksmiths in your area to assist you, you can bring your vehicle to the dealership if you have a transponder key. For vehicles that use mechanical keys, you can present the dealership with updated registration and ID. They should be able to cut you a new key for your vehicle. Please keep in mind that some dealerships don't store key codes for more than 10 years. If your key code is not on file with the dealership, then you will have to consult a locksmith.
How Do I Know If My Acura CL Key Needs To Be Programmed?
Mechanical keys from 1995-1998 do not need to be programmed. Transponder keys from 1998-2003 do need to be programmed to the vehicle.
Can I Program My Acura CL Key Myself?
Transponder keys for Acura CL are not self-programmable and will need to be programmed by a professional locksmith or dealer.
What Type Of Keyless Entry Remote Does My Acura CL Use?
1997-1999 Acura CL uses part number 72147-SY8-A03 and FCC A269ZUA108.
2001-2003 Acura CL uses part numbers 72147-S0K-A23 or 72147-S0K-A13 and FCC E4EG8D-444H-A.
If you are in need of an Acura CL car key, fob, or remote replacement in Oahu, Hawaii, give The Key Fob And Remote Shop a call at 808-435-5804 to inquire about pricing.